T-Cut Grey Scratch Remover Color Fast Paintwork Restorer Car Polish - 500ml plus a Wax Applicator Set with Handle * 13 Colours Available

Product Information

Step 6: If you feel your whole car needs a paintwork restoration. You would have to ensure you are ready for the lengthy and strenuous task, as each section of your car would need to be treated separately. Also, it would require a more thorough after-care. The whole car would need to be waxed to prevent the paint from dulling. T-Cut Metallic –Designed specifically to restore the colour and lustre of metallic and pearlescent car paintwork. This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After Care From T-Cut Rapid Scratch Remover for light scratches to T-Cut Metallic Colour Restorer for metallic paintwork, the selection is abundant. Choose the one that matches your specific vehicle needs. Safety First

Remember, T-Cut is not an instant fix. It requires time to penetrate the scratches and start the cleaning process. Frequently Asked Questions about Using T-Cut The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. Ultimately, using T-Cut will restore shine initially, but the paint will always fade (due to it being a paint restoration compound and not paint) and the best way to give an old car a new lease of colour life would be a new paint job. This can prove expensive. When not to use T Cut Deeper Scratches Where tcut is not suitable, however, is with deeper scratches where it is far less successful, or even places where the car has been dented as well as scraped. It should only be used to rectify light, shallow, surface scratches where T-Cut can be most effective. Keyed car scratches or deep scrapes from a wall or kerb can often be too deep, going all the way down to the basecoat or primer layers of the car paint, for a simple cutting compound to fix. Where this is the case, a stronger method of scratch removal may be needed, and we’ll talk more about this later. How Does T-Cut Work?T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s Paint Avoidable errors can hinder the effectiveness of T-Cut or even result in additional damage to the paintwork. One common mistake is applying T-Cut on unsuitable surfaces, such as matte finishes or non-metallic paintwork, leading to discoloration or accidental damage. Another error is impatience, where the product isn’t given sufficient time to penetrate the scratches before it’s buffed off. Know Your Surface

Here at ChipsAway we are experts in car scratch repair, and we can repair scratches that tcut usually won’t touch. Our speciality is offering an affordable and convenient service that gets your car sparkling in no time. With experts positioned and poised up and down the country, we have specialists near you. Free, No-obligation Repair Estimate Have you found a few scratches on your paintwork that you’re itching to get removed, but don’t have the time or confidence to do yourself? Get in touch with Bodyteq today for a free estimate. Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution. Sometimes, the first thing that will come to your mind is if you can fix it yourself. Thankfully, there are many products out there that are specifically made for removing scratches, one popular one being T-Cut. Read on to find out the details of the product, including a step-by-step guide on how to use it! What Is T-Cut Scratch Remover and what is it suitable for? A surface scratch is determined by feeling no obstruction when passing a fingernail over the mark. If an obstruction is noticed, it will be deeper than a surface scratch and this product can only help in improving the appearance of the scratch.T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process. Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). T-Cut Color Fast is a revolutionary coloured paintwork renovator with Variomorphic Ceramic Technology that removes light scratches*, oxidation, ingrained dirt, bugs and surface imperfections. The coloured pigments and the SiO2 molecules enriches colour, cleans, restores and polishes in one easy application, leaving a protective shine that lasts and lasts. Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint?

Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips. A small amount of T-Cut should be able to remove spray paint from your car paintwork. As with all applications, it needs to be applied very carefully to ensure that further damage is not attributed to the care whilst removing the spray paint. Which T-Cut to use? T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application. It is also for this reason that it is important to follow the instructions precisely when using T-Cut. When used as a one-off, T-Cut is generally speaking relatively harmless to your car; however, Since T-Cut removes the very top layer of paint from the surface of the car around the scratch, persistent use can wear the paint of your car thin. How To Prepare Your Car for T Cut T-Cut is a type of car scratch remover, that is also known as a rubbing or cutting compound. A well-known brand in the car care industry, T-Cut is used to remove light surface scratches, marks and scuffs on car paintwork. There are several different types of T-Cut available, including the original restorer fluid, rapid scratch remover, T-Cut Colour Fast, the T-Cut Scratch Magic Pen, and a T-Cut metal polish. Does T-cut actually work?

Frequently Asked Questions about Using T-Cut

Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine. The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces:

After the application, give the T-Cut Solution time to work its magic. Allow the product to penetrate the scratches, and once dry, use a clean microfibre cloth to buff it off, revealing your car’s refreshed original shine. Tips for Effective Use Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence The next step is to put on a pair of gloves and apply tcut to a clean cloth – something without fluffy fibres. The reason for this is the fibres can break off into the T-Cut solution, and this can also mark the paint. Applying T-Cut There are other cases where applying tcut yourself, or trying to repair the scratches yourself, are not recommended. If you are unfamiliar with repairsT-Cut Colour Fast – Removes scratches, scuffs and blemishes whilst adding colour. Suitable for red, white, blue or silver car paint.