Philips LED A60 E27 Edison Screw Bulbs, Frosted 5.5W (40W) - Warm White (Ten Pack) (Old Pack of 1)

Product Information

Watts (W) is a unit of power used to quantify the rate of energy transfer. It is defined as 1 joule per second. A kilowatt is a multiple of a watt. One kilowatt (kW) is equal to 1,000 watts. Both watts and kilowatts are SI units of power and are the most common units of power used. Kilowatt-hours (kWh) are a unit of energy. One kilowatt-hour is equal to the energy used to maintain one kilowatt of power for one hour. Generally, when discussing the cost of electricity, we talk in terms of energy. Energy (E) and power (P) are related to each other through time (t): Handy tip: the rule of thumb is to divide the number of watts of an incandescent light bulb by 10, which will give you the approximate number of watts of a led lamp. LED and CFL bulbs can be useful to serve different purposes, depending on the type of light that is needed for an environment. LED Lights can emit light in a specific direction, ideal for use as downlights in kitchens, bathrooms, hallways or for task-based lighting (e.g. reading). However there are also directional and wide beam angle LED lights available, providing more control of light angle and spread. In comparison, CFL lights provide widespread light, and so tend to be used in offices, schools or shops, but would not be suited for more specific lighting tasks such as downlights or reading lights. Efficiency LED equivalents to metal halide lighting offer similar energy savings as over sodium lighting – around 50%. Metal Halide Light Bulb Wattage

The appropriate colour temperature enables you to choose the ambiance you would like for each room. Colour temperature is expressed in kelvin. The higher the colour temperature, the higher the Kelvin rating and the more blueish the colour. Light sources with a (comparatively) low temperature tend to be more reddish.

Use the calculator below to estimate electricity usage and cost based on the power requirements and usage of appliances. The amount of time and power that each appliance is used varies significantly between households, so for the best results, adjust the usage for each appliance to most accurately reflect your personal usage. Typical appliance: One of the most common units of electrical power for appliances is the watt (W). Other common units of power include kilowatts (kW), British thermal units (BTU), horsepower (hp), and tons.

Wattage is used to calculate energy consumption, and for conventional bulbs like the incandescent bulb, wattage is the primary measurement. This is because their energy consumption matters as this equals the light's brightness. The problem with these bulbs is that a lot of energy is wasted in generating light. LED lamps are made up of clusters of light-emitting diodes (LEDs). As they are so small, LED lamps come in all shapes and designs. Sodium lights can be high pressure sodium (HPS) or low pressure sodium (LPS). LPS are more efficient than HPS but emit a very dim, yellow light. Either way, LED lighting is around 50% more efficient than both HPS and LPS lighting. Sodium Light Bulb Wattage Below are some tips for saving energy and lowering electricity bills. Not all of them are always possible, but implementing even a few of them can lead to savings.The brightness of traditional light bulbs like the incandescent bulb and halogen bulbs is best measured using watts because its energy consumption transcends its brightness. However, bulbs that use better technology like the LED bulb use lumen as a measure of its brightness because, unlike the traditional light bulbs, an LED bulb's wattage (energy consumption) has nothing to do with its brightness. The switch from incandescent light bulbs to the energy-saving compact fluorescent lamp (CFL) is something that many households are still making decisions on, and the LED vs CFL debate is one that many of us are familiar with! There are a few things to think about, and many people look to maintain the same (or higher) levels of efficiency when choosing to switch to a different type of bulb, as well as light bulb running costs. Identifying your light bulb running costs can seem confusing, so we have created a guide which outlines the running costs of each type of bulb. For decades, we’ve been buying light bulbs according to wattage. But as energy-efficient, low-watt light bulbs like CFLs and LEDs have become readily available, watts have become an unreliable metric for selecting bulbs. Instead of focusing on wattage, which measures power or energy use, manufacturers are indicating the brightness of their energy-efficient bulbs according to lumens, which measure light output. So while we may be accustomed to shopping for bulbs according to wattage, lumens are actually a more accurate measurement of how bright your light will be. Converting Lumens to Watts